Light is radiant energy, usually referring to electromagnetic radiation that is visible to the human eye, and is responsible for the sense of sight.[1] Visible light is usually defined as having a wavelength in the range of 400 nanometres (nm), or 400×10−9 m, to 700 nanometres – between the infrared, with longer wavelengths and the ultraviolet, with shorter wavelengths.[2][3] These numbers do not represent the absolute limits of human vision, but the approximate range within which most people can see reasonably well under most circumstances. Various sources define visible light as narrowly as 420 to 680[4][5] to as broadly as 380 to 800 nm.[6][7] Under ideal laboratory conditions, people can see infrared up to at least 1050 nm,[8] children and young adults ultraviolet down to about 310 to 313 nm.[9][10][11]
Primary properties of visible light are intensity, propagation direction, frequency or wavelength spectrum, and polarisation, while its speed in a vacuum, 299,792,458 meters per second, is one of the fundamental constants of nature. Visible light, as with all types of electromagnetic radiation (EMR), is experimentally found to always move at this speed in vacuum.[citation needed]
In common with all types of EMR, visible light is emitted and absorbed in tiny "packets" called photons, and exhibits properties of both waves and particles. This property is referred to as the wave–particle duality. The study of light, known as optics, is an important research area in modern physics.
In physics, the term light sometimes refers to electromagnetic radiation of any wavelength, whether visible or not.[12][13] This article focuses on visible light. See the electromagnetic radiation article for the general term.
The speed of light in a vacuum is defined to be exactly 299,792,458 m/s (approximately 186,282 miles per second). The fixed value of the speed of light in SI units results from the fact that the metre is now defined in terms of the speed of light. All forms of electromagnetic radiation move at exactly this same speed in vacuum.
Different physicists have attempted to measure the speed of light throughout history. Galileo attempted to measure the speed of light in the seventeenth century. An early experiment to measure the speed of light was conducted by Ole Rømer, a Danish physicist, in 1676. Using a telescope, Rømer observed the motions of Jupiter and one of its moons, Io. Noting discrepancies in the apparent period of Io's orbit, he calculated that light takes about 22 minutes to traverse the diameter of Earth's orbit.[14] However, its size was not known at that time. If Rømer had known the diameter of the Earth's orbit, he would have calculated a speed of 227,000,000 m/s.
Another, more accurate, measurement of the speed of light was performed in Europe by Hippolyte Fizeau in 1849. Fizeau directed a beam of light at a mirror several kilometers away. A rotating cog wheel was placed in the path of the light beam as it traveled from the source, to the mirror and then returned to its origin. Fizeau found that at a certain rate of rotation, the beam would pass through one gap in the wheel on the way out and the next gap on the way back. Knowing the distance to the mirror, the number of teeth on the wheel, and the rate of rotation, Fizeau was able to calculate the speed of light as 313,000,000 m/s.
Léon Foucault used an experiment which used rotating mirrors to obtain a value of 298,000,000 m/s in 1862. Albert A. Michelson conducted experiments on the speed of light from 1877 until his death in 1931. He refined Foucault's methods in 1926 using improved rotating mirrors to measure the time it took light to make a round trip from Mt. Wilson to Mt. San Antonio in California. The precise measurements yielded a speed of 299,796,000 m/s.[15]
The effective velocity of light in various transparent substances containing ordinary matter, is less than in vacuum. For example the speed of light in water is about 3/4 of that in vacuum.
As an extreme example of the nature of light-slowing in matter, two independent teams of physicists were able to bring light to a "complete standstill" by passing it through a Bose-Einstein Condensate of the element rubidium, one team at Harvard University and the Rowland Institute for Science in Cambridge, Mass., and the other at the Harvard-Smithsonian Center for Astrophysics, also in Cambridge.[16] However, the popular description of light being "stopped" in these experiments refers only to light being stored in the excited states of atoms, then re-emitted at an arbitrary later time, as stimulated by a second laser pulse. During the time it had "stopped" it had ceased to be light.
0 comments:
Post a Comment